1970 Triumph Bonneville T120R bobber


Here's a stunning 1970 Triumph Bonneville T120R ground up rebuild by a customer of Low Brow Customs. Found in a storage unit untouched for 20+ years it was a 3 year rebuild and is now for sale on eBay. Heaps more photos and specs after the jump...




 


Frame/Controls/Etc.

  • Original Front half of frame with numbers (Fresh High Gloss Black Powedercoating)
  • David Bird Looped End bolt on rear section 2" Stretch 1" Drop (Fresh High Gloss Black Powdercoating) (LOWBROW)
  • Custom made sissy bar/tailight mount made with builders kit from (LOWBROW)
  • Custom made TIG welded Clip on bars (Chromed)
  • New Aluminum Levers (LOWBROW)
  • Re-pop Vintage Throttle (LOWBROW)
  • Brand New Motion Pro Cables (throttle, clutch, brake) (MOTION PRO)
  • BILTWELL Kung Fu Grips (LOWBROW)
  • 1" Neck conversion with New roller bearings
  • 70's Betor Motocross Forks/Triple Trees (POLISHED ALUMINUM) with New Progressive Springs/Oil and Dust Seals
  • New 21" Wheel from Buchanans with New Stainless spokes and nipples (Buchanans)
  • New 21x3 Avon Speedmaster (Buchanans)
  • New 18" Dunlop Wheel from Buchanans with New Stainless spokes and nipples (Buchanans)
  • New 4.00x18 Firestone Deluxe Rear Tire (Coker)
  • New wheel bearings front and rear
  • New 20 tooth front sprocket (LOWBROW)
  • New 43 Tooth Hub/Sprocket Combo (LOWBROW)
  • New Takasago Chain (LOWBROW)
  • 1982 Honda Dual Pull Front Drum Brake with New Pads (Fresh Black Powdercoating)
  • Fresh Black Powdercoating on Rear Drum/Hub as well
  • New Footpegs/Shift Lever/Kick Starter and Fresh Rubbers
  • Original 70's BAR Enterprises Leather Seat and Pillion Pad (Made in California)
  • Original front fender on rear
  • Tank and Fender have fresh gloss black paint with a metalflake gold decal on the tank








ENGINE/FUEL/ELECTRONICS

  • Morgo MKII 750cc Big Bore Kit - New Pistons, Rings, Pins, Clips  (British Cycle Supply)
  • New Gaskets throughout entire motor (British Cycle Supply)
  • New Megacycle Cam (Megacycle)
  • New Rod Bearings and Bushings (British Cycle Supply)
  • Black Diamond Valves, Springs and Guides (British Cycle Supply)
  • Boyer Bransden Mark IV Electronic Ignition (Boyer) NO POINTS!!
  • Boyer Bransden Alternator and Dynamo Power Box (Battery Eliminator)
  • Boyer Bransden Coils, Plug Wires and Caps
  • All Electronics have been hidden under the tank
  • Re-pop cloth wiring (LOWBROW)
  • Brand New Stator and Rotor (British Cycle Supply)
  • Brand New Clutch Fibers and Steels (British Cycle Supply)
  • Brand New (NOT REBUILT) Amal Carburetors (British Cycle Supply) - First Kick Starter!
  • Polished Aluminum Velocity Stacks (LOWBROW)
  • New TT pipes - I bought the ones without engine mounts and made 1 3/4 hangers that attach to the lower motor mount under the bike (LOWBROW)
  • Ignition and Electronics are run with mini toggle switches that are hidden TBD to the seller!
  • Original gas tank that has been washed and relined
  • New Fuel Petcocks (LOWBROW)
  • New 5 3/4 Headlight (LOWBROW)
  • After Hours Choppers Mini Titmouse Aluminum Taillight (After Hours Choppers)
  • Original 70's Octagon Oil tank that has been washed and relined (New Fittings, Filters, Oils Lines)
  • Stainless Steel Bolt Kit throughout